Hardy HI 6500 Series - Manual (Page 18)

10 Chapter 3
•
•
•
•
•
•
Step 5. Be sure to complete the warranty registration on the Hardy Process Solutions web
site.
Spare Parts List
Tool List
To install the HI 6500 series the following tools will be required.
• Drill with 5mm drill bit
• Jewelers screw driver (if cable assemble needs to be modified)
• 4mm nut driver with a maximum outside dimension of 8mm
• 10-50 mm Unibit (for optional display installation)
Installing the HI 6500 Series Instrument
Before getting started, take the following precautions:
• Wear an approved wrist-strap grounding device when handling the instrument.
• Touch a grounded object or surface to rid yourself of any electrostatic discharged prior
to handling the instrument.
• Handle the instrument from the bezel in front away from the connector. Do not touch
the connector pins.
Part Reference Description Quantity
HI 6110 HI 6500 Series Instrument Display (Optional) 1
0551-0653-01-0 HI 6500 Series Alt. Panel and Wall Mount Kit
(optional) 1
0578-0072-01 Paper Mounting Template 1
0524-0034-01-0 Mounting Gasket 1
2140-0092-0 J1, 3-pin Power Connector 1
2140-0139-09-0 J2, 9-pin Load Cell Connector 1
2140-0139-06-0 J3, 6-pin Serial Port Connector 1
2140-0139-03-0 J4, 3-pin 4-20mA Connector 1
0509-0534-01-0 Cable Assy: Four Instruments Connector to One
Display Panel 1
WARNING - Electrostatic discharge may damage semiconductor components in
the module. DO NOT TOUCH THE CONNECTOR PINS.
WARNING AVERTISSEMENT – Les décharges électrostatiques peuvent
endommager les composants semi-conducteurs dans le module. NE TOUCHEZ
PAS les broches du connecteur.