ALTANA LCM IV - Manual (Page 36)

37
Standard programs
The target site can be defined by IP address or a server name.
12. Press IP-Address and enter the IP address or select Server
Name and enter a server name.
13. Press Data Folder and enter the target folder name.
Note: A folder with the selected name must exist on the target
system. Additionally, the folder must be shared with the operator,
using the corresponding password.
14. Press OK to confirm the entry.
User and password must be identical to the settings on the
target system.
15. Press User and enter the user designation.
16. Press OK to confirm.
17. Press Password and enter the password.
18. Press OK to confirm the entry.
19. Press Factory Default to restore the network configuration to
the factory defaults.