ALTANA LCM IV - Manual (Page 56)

57
Standard programs
5.5.1.3 Change the color scale after a measurement
1. Press the touch-sensitive area, e. g. Color Value Gardner.
2. A list of all color scales is displayed.
3. Select the required scale.
4. Press OK to confirm.
Color Scale Selection
Define 3 different color scale combinations with up to 3 different color scales for the result display.
Selection 1: Klett Color No. + Yellowness Index
Selection 2: Klett Color No. + ADMI Color No. + Yellowness Index
Selection 3: Yellowness Index + individual transmittance
Illuminant/Observer:
C/2°
Illuminant: Select C, A or D65
Observer: 2° or 10°
Color Scales for
Operator ID:
Individual selection of the color scales for the operator ID.
Table 4 Color measurement options(Continued)
Options Description