ALTANA LCM IV - Manual (Page 71)

72
Standard programs
Concentration Factor:
1. Press Concentration Factor: Off in the "Options" menu.
2. Press On to activate this function.
3. Press the Factor button and enter the factor.
4. Press Unit and select the corresponding units for
concentration from the displayed list.
5. Press OK to confirm.
Concentration Resolution:
1. Press Concentration Resolution in the "Options" menu.
2. Select the resolution.
3. Press OK to confirm.
4. Then press Return to return to measurement mode.
O Wavelength
To input the wavelength setting. Use the alphanumeric keypad to enter the reading wavelengths.
The entered wavelength must be in the range from 320-110 nm.
Send Data icon To send data to a printer, computer or USB memory stick (Type A)
Concentration Factor Multiplication factor for converting absorbance values into concentration values.
Concentration
Resolution
To select the number of decimal places.
Recall measurement
data
Recall saved measurement data, wavelength scans or time courses, refer to section 5.3,
page 38 .
Instrument Setup mode Basic data of the instrument, refer to section 5.2, page 23 .
Table 7 Options for Single Wavelength(Continued)
Options Description