Mopar K6860631 - Manual (Page 101)

7
37. Position the load floor in the vehicle. Route the twisted
pair wire harness (2) through the bottom of the floor
and connect the harness to the Wi-Fi Router connec-
tor.
38. Install the two nuts that secure the load floor to the
floor panel.
39. Using the supplied self-tapping screws, secure the
Wi-Fi Router (1) to the load floor.
40. Install the D-pillar trim panel. Position the locating tabs
on the bottom of the D-pillar trim panel into the slots
in the top of the quarter trim panel.
41. Align the retaining tabs on the D-pillar trim panel with
the retaining clips in the D-pillar and engage the re-
taining tabs that secure the trim panel to the D-pillar.
42. Install the upper liftgate trim panel. Align the retaining
tabs on the upper liftgate trim panel with the retaining
clips in the liftgate opening and engage the retaining
tabs that secure the trim panel to the liftgate opening.
Aug 08, 2008 K6860631 Rev. 1