Mopar K6860631 - Manual (Page 154)

4
23. Remove the nut (1) from the grounding lug (3).
24. Install the WiFi harness grounding wire and eyelet (2)
to the grounding lug.
25. Install the grounding lug nut.
26. Install the drivers side IP bezel (2) ensuring the retain-
ers engage.
27. Install the IP bezel mounting fastener (3).
28. Place the A-pillar into position, install the tether and
mounting fastener.
29. Install the A-pillar (2) to the body side (1) ensuring the
snap retainers engage.
Aug 08, 2008 K6860631 Rev. 1