Mopar K6860631 - Manual (Page 84)

10
46. Using hand pressure, push the retractor cover (1)
downward over the retractor (3) far enough to engage
the two locator pins in the top of the inboard cover
half with the locator holes in the top of the retractor.
47. Install the two plastic push-pin retainers (2) that se-
cure the retractor cover to the retractor.
QUAD CAB
48. Position the cowl trim panel in the vehicle with the door
sill scuff plate end (1) of the trim panel angled upward.
Seat the upper outer end of the trim panel underneath
the dash panel and engage the retaining tabs that se-
cure the trim panel to the cowl.
49. Align the retaining tabs on the door sill scuff plate end
of the trim panel with the retaining clips (2) in the front
door sill (3) and engage the retaining tabs that secure
the trim panel to the door sill.
Aug 08, 2008 K6860631 Rev. 1