Mopar K6860631 - Manual (Page 24)

10
49. Position the upper C-pillar trim panel (5) to the C-pillar
(4).
50. Engage the retaining tabs that secure the upper C-pil-
lar trim panel to the C-pillar.
51. Install the bolt (2) that secures the seat belt (3) to the
top of the C-pillar. Tighten the bolt to 40 N·m (30 ft.
lbs.).
52. Install the cap (1) onto the seat belt.
53. Route the seat belt (3) through the slot in the lower
B-pillar trim panel (1) and position the trim panel to the
B-pillar (2).
54. Engage the retaining tabs that secure the lower B-pil-
lar trim panel to the B-pillar.
55. Position the upper B-pillar trim panel (5) to the B-pillar
(4).
56. Engage the retaining tabs that secure the upper B-pil-
lar trim panel to the B-pillar.
57. Install the bolt (2) that secures the seat belt (3) to the
top of the B-pillar. Tighten the bolt to 40 N·m (30 ft.
lbs.).
58. Install the cap (1) onto the seat belt.
Aug 08, 2008 K6860631Rev. 1