Mopar K6860631 - Manual (Page 128)

6
34. Using a trim stick or equivalent, carefully remove the
A-pillar trim panel (3) from the body side assembly (2),
disengaging the spring clip retainers (1).
35. Install the A-pillar trim panel (3) to the body side as-
sembly (2), engaging the spring clip retainers (1).
36. Remove the sound insulator from the passenger side
lower instrument panel.
37. Position the glove box on the hinges.
38. Raise the glove box by depressing the two tabs at the
sides of the glove box and closing the glove box.
39. Install both the left and right sides of the instrument
panel bezel (3).
40. Install the ignition trim ring (5) to the instrument panel
bezel.
Aug 08, 2008 K6860631 Rev. 1