Mopar K6860631 - Manual (Page 164)

9
30. Position the bezel (2) over the shiftier and brake lever
and seat the clips fully.
31. Install the cup holder and ash receiver (1), if equipped.
32. If equipped, position the transfer case shifter knob
onto the shift shaft and seat fully.
33. If equipped, position the manual transmission shifter
handle (2) onto the shift shaft (1) and install the bolt
(3).
34. Tighten the bolt (3) to 33 N·m (24.5 ft. lbs.)
Aug 08, 2008 K6860631 Rev. 1