Mopar K6860631 - Manual (Page 126)

4
24. Using crimping tool (1), Mopar® p/n 05019912AA or
equivalent, crimp the splice clip and wires together.
25. Repeat the previous two steps for the ground side
wires.
26. Solder (3) the connection (2) together using rosin core
solder (1).
27. Center the heat shrink tubing (2) over the solder joint
and heat using a heat gun. Heat the joint until the tub-
ing is tightly sealed and sealant (1) comes out of both
ends of the tubing.
28. Install the router under the passenger front seat and
secure with the hardware provided.
29. Connect the electrical connector to the router.
Aug 08, 2008 K6860631 Rev. 1