Mopar K6860631 - Manual (Page 36)

7
40. Place the strands of the power side wires overlapping each
other inside of the splice clip (1).
41. Using crimping tool (1), Mopar® p/n 05019912AA or equiv-
alent, crimp the splice clip and wires together.
42. Repeat the previous two steps for the ground side wires.
CAUTION: Do not use acid core solder.
43. Solder (3) the connection (2) together using rosin core sol-
der (1).
Aug 08, 2008 K6860631 Rev. 1