Mopar K6860631 - Manual (Page 48)

6
33. Using crimping tool (1), Mopar® p/n 05019912AA or equiv-
alent, crimp the splice clip and wires together.
34. Repeat the previous two steps for the ground side wires.
35. Solder (3) the connection (2) together using rosin core sol-
der (1).
36. Center the heat shrink tubing (2) over the solder joint and
heat using a heat gun. Heat the joint until the tubing is
tightly sealed and sealant (1) comes out of both ends of
the tubing.
FULL CENTER CONSOLE
Aug 08, 2008 K6860631 Rev. 1