Mopar K6860631 - Manual (Page 136)

7
45. Place scuff plate (1) onto door sill (2).
46. Align scuff plate tabs with door scuff holes.
47. Hand press scuff plate ensuring tabs are properly
seated.
48. Install the left side lower cowl trim panel.
49. Insert lower tabs on B-pillar lower trim (1) onto sill
panel.
50. Hand tap on clip locations ensuring clips are properly
seated.
51. Install the 40% seat section (4) over the stud and seat
bracket and install the seat bracket bolts (6).
52. Tighten the seat bracket bolts (6) to 46 N·m (34 ft.
lbs.).
53. Install the nut (5).
54. Tighten the nuts (5 and 3) to 80 N·m (60 ft. lbs.).
Aug 08, 2008 K6860631 Rev. 1