Mopar K6860631 - Manual (Page 83)

9
CLUB CAB
42. Position the cowl trim panel (1) in the vehicle with the
door sill scuff plate end (2) of the trim panel angled
upward. Seat the upper outer end of the trim panel
underneath the dash panel and engage the retaining
tabs that secure the trim panel to the cowl.
43. Align the retaining tabs on the door sill scuff plate end
of the trim panel with the retaining clips in the front
door sill and engage the retaining tabs that secure the
trim panel to the door sill.
44. Align the retaining tabs (2) on the rear door sill scuff
plate (1) with the retaining clips in the rear door sill and
engage the retaining tabs that secure the scuff plate
to the door sill.
45. Position the inboard (1) and outboard (3) outer seat
belt retractor cover halves around the seat belt (2) with
the top of each half angled toward the other and en-
gage the snaps that secure the two halves together.
Then, close the cover around the seat belt.
Aug 08, 2008 K6860631 Rev. 1