Interlogix TruVision Navigator 5.0 User Manual - Manual (Page 113)

Appendix A: Device Details
TruVision Navigator 5.0 Service Pack 3 User Manual 105
Feature Support Notes
Notifications Alarm
Video Loss
Disk Full
Disk Failed
Authentication Lock Up
Device Powered Up
Fan Failed
Abnormal Temperature
DVMRe Pro, DVMRe CT or DVMRe CTII - to
setup these devices to send TCP notifications,
get the configuration of the device. Under the
Alarm menu, go to Notification and make sure
the notification method on the page is set to
TCP. Enable each of the notifications using the
radio buttons. Set the Primary host to the IP
address of where the TruVision Navigator
Server services are located (NotificationWriter
and NotificationProcessor). Set the port as the
same port as you set on Notifications Tab of the
TruVision Navigator Server Properties dialog.
Click Save for the device configuration changes
to be sent to the device. Restart the TruVision
Navigator Notification Writer and Notification
Processor Services via the Services dialog in
TruVision Navigator.
DVMRe ezT, StoreSafe, StoreSafe Pro, and
StoreSafe Pro II - to setup these devices to
send SMTP notifications, get the Configuration
of the device. Under the Alarm menu, go to
Notification and select the kind of notification
you want to receive by enabling the check box
“Send Email” for that selected value. Set the
one local email address of your SMTP server to
send the emails (Like FROM:) to Email
Address#1 and Email Address2. Set your
SMTP Server IP Address and Port number.
Click Save to push the configuration to the
device.
No Notifications Available in the device - DSR,
DVSE, DVMRe CS, and DVMRe CD.
Health Diagnostics IP Address
MAC Address
Model Name
Serial Number
Firmware Version
Device Time/Date
HDD Capacity (Gb)
Cameras in Video Loss
Cameras in Alarm
Current Client Connections
Record Status
Record Time Left
Video Stored (Hours)
Power on Duration
Device Export Time Left