Interlogix TruVision Navigator 5.0 User Manual - Manual (Page 138)

Appendix A: Device Settings
130 TruVision Navigator 5.0 Service Pack 3 User Manual
Feature Support Notes
Firmware Upload Yes To upload firmware to this device via TruVision
Navigator, download the firmware file with file
extension .tgz. Extract the .tar file to your desktop
from the .tgz. Right-click on the device in the
Navigator and select Upload Firmware. Browse
for the .tar file when prompted. Execute the
upload. Remember the Local Scheduling Service
needs to be running
After TruVision Navigator reports firmware upload
success in the Task Panel, the device will require
1-2 minute wait before the user can reconnect to
the device.
Bulk Firmware
Upload Yes
Device
Configuration Yes Does not currently support remote configuration of
resolution for recording.
DDNS when enabled usually causes the box to
slow down when getting / setting configuration.
Bulk Configuration Yes
Remote Reboot Yes Closing video tiles while the device is rebooting
will cause TruVision Navigator to freeze and
require the user to log back into the application.
TruVision TVR31 (DVR)
Feature Support Notes
Default Ports Video = 80 (editable)
Command and Control = 80
(editable)
Configuration = 80 (editable)
Notifications = 5000 (editable)
Firmware Upload = 80 (editable)
Video and control port changes must be done from
the front panel of the device.
Default Username
/ Password admin / 1234 We recommend changing this default password at
time of installation.
Compression H.264
Connection Types TCP
TCP I-frame