Interlogix TruVision Navigator 5.0 User Manual - Manual (Page 75)

Chapter 3: Operation
TruVision Navigator 5.0 Service Pack 3 User Manual 67
Figure 57: Firmware Upload Window
Camera search
TruVision Navigator allows you to search cameras for alarms, alarms plus events,
motion, and point-of-sale text-related video.
For those searches, the device must first be configured to tag the camera’s video based
upon those parameters (which must be available in the device). For instance, to be able
to search a camera for motion in TruVision Navigator, the motion grid must be setup for
that camera in the device and tagged for motion. This device setup can be done
remotely via the configuration capability within TruVision Navigator or from the device
itself.
To search for video tagged with text, enter the text string you want to search for and click
Search. Toggle the Overlay Text on Video checkbox to overlay the text on the video or
place it beside the video. This checkbox is dynamic so if you toggle it during playback,
the text will switch from overlay to side-by-side and vice-versa (it will take a few seconds
to switch).
Remember that for text searches, the device must be working in conjunction with a
ProBridge. The ProBridge acts as a bridge between the recording device and the Point-
of-Sale (POS) device (i.e. a cash register or ATM). It essentially feeds the POS text
data into the recording device where it is tagged to the applicable video.
Different devices support varying levels of camera search. See the device-specific
chapters for more detail on what types of video data is available per device.