Interlogix TruVision Navigator 5.0 User Manual - Manual (Page 63)

Chapter 3: Operation
TruVision Navigator 5.0 Service Pack 3 User Manual 55
Multi-site - The multi-site feature allows you to view video from multiple cameras from
different devices simultaneously in the Viewer. TruVision Navigator can render Wavelet,
Wavejet, MJPEG, MPEG4, and H.264 compression streams simultaneously, which
allows you to mix and match the cameras from your many devices seamlessly.
Standard video tile layouts include 1x1, 2x2, 3x3, 4x4, and 5x5. You can also use the 8-
up custom tile layout that features 1 large video tile surrounded by 7 smaller ones.
When in a multi-up view (i.e. 4x4), you can double-click in a video tile to bring the video
to full screen. Double-click in the video tile again to return to multi-up viewing.
Maximize Viewer - If you would like to close all panels instantly except for the Viewer,
use this option. Click it again to return to the previous layout.
Close All Video - Select this option to close all video.
Instant Replay - Click on the Instant Replay button on the video tile to go from Live to
Playback by a user-defined and pre-configured period of time (i.e. 5 minutes) for quick
viewing of an incident.
Custom View - Custom views allow you to define and save multi-site view templates for
future use. You can create as many custom views as you want. Custom views are
available by selecting the Custom View option in the Viewer header bar dropdown menu.
To define a custom view, do the following:
Load all the cameras you want to include in the custom view in the Viewer.
Organize your cameras by dragging and dropping the video tile’s status bar to other
video tiles.
Click Custom View from the Viewer panel header bar dropdown menu.
Select Save Custom View.
Enter a title in the Title field.
Click OK.
Close all videos.
From the Viewer panel header bar dropdown menu, highlight the Custom View title in
the menu and select.