Interlogix TruVision Navigator 5.0 User Manual User Manual
Page 57
Chapter 3: Operation
TruVision Navigator 5.0 Service Pack 3 User Manual
49
Once video tiles are selected, perform one of the following operations to retrieve
Playback video (assuming there is video on the device for the specified time):
•
Go To Search – click on the Go To button in the Controller, enter a date and time,
and click OK. Playback will start at the desired date and time.
• Playback
Button – click on the Playback button in the Controller to go back a user-
defined period of time (the same time you set for Instant Replay - i.e. 5 minutes).
•
Instant Replay Button - click on the Instant Replay button in the video tile status bar
to go back a user-defined period of time (i.e. 5 minutes).
• Controller
timeline - double-click on the Controller timeline for a point-in-time in the
past. Playback will start at the desired date and time.
• Playback
Controls - use the playback controls (as devices permit) for Frame
Advance, Fast Forward, Frame Reverse, Rewind, Pause, and Play to pinpoint the
exact incident you want.
Once the video is in Playback, a blue seek triangle displays in the Controller timeline
indicating where the selected video is playing in time. Drag and drop the blue seek
triangle backwards or forwards along the timeline to locate video.
Place your cursor over the blue seek triangle and green / red markers will display
underneath. The green marker represents the beginning time and the red marker
represents the ending time of the video segment you want to export. Slide both markers
as appropriate to mark the video segment.
To move the video segment to the Collector for export, click the Video button in the
Controller. To move a snapshot to the Collector for export, click the Snapshot button in
the Controller.
Thumbnails for snapshots and video segments will be added to the Collector and
readied for export. Snapshots display a start time as it is a single point in time. Video
segments display a time range that corresponds to the time range you marked on the
timeline. Double-click a snapshot or video segment thumbnail to replay it in the Viewer
and refine your time/date ranges.