Interlogix TruVision Navigator 5.0 User Manual - Manual (Page 171)

Appendix A: Device Details
TruVision Navigator 5.0 Service Pack 3 User Manual 163
Feature Support Notes
The Recording Tab Recording Summary – provides the user
an overall recording summary for the
device based upon what has been
configured.
Storage Estimator – allows the user to
simulate number of days of storage
based upon total device bandwidth
usage.
Camera Stream Detail – provides the
user a summary by stream of the
configuration details. This is not
editable. Users must right-click on the
camera in the Navigator and select
Configure Camera to change these
settings.
Pre and Post Event Recording - select
the minutes here for pre and post event
recording.
Auto Delete- set the retention period for
recorded video for the TVN40.
The Alarm Tab There are four alarm inputs on the
TVN40 that can be configured to trigger
the associated IP Cameras for Event
recording.
These fields will not be initially
populated as designated IP Cameras
must be configured to record on Event
before these menus will be populated.
Once this has been completed, the
appropriate IP Cameras will appear as
values in the dropdown box next to each
input. They can then be associated to
inputs.
Remember to come back to this form
after you setup your IP Cameras to
associate the inputs.