Interlogix TruVision Navigator 5.0 User Manual - Manual (Page 93)

Chapter 4: TruVision Navigator Settings
TruVision Navigator 5.0 Service Pack 3 User Manual 85
To make a user inactive, right-click on the user under the Users node in the Navigator
and select Inactivate User. Click Yes when prompted with “Are you sure you want to
inactivate this user?”
Inactive users will be removed from the Users node in the Navigator unless you right-
click on the Users node and select Include Inactive Users. The Inactive User icon is
shaded grey while the Active User icon is shaded blue.
To view all users in the database (active or inactive) in a list, right-click on the Users
node and select Show User List. The Users dialog will appear. All of the columns in this
dialog are sortable so you can find users quickly. Double-click on any user row to view
that user’s properties dialog.
Figure 65: Users Window
Restore an inactive user
When an Administrator needs to restore an inactive user in the system, right-click on the
inactive user under the Users node in the Navigator and select Activate User. You can
also right-click on the inactive user under the Users node in the Navigator and select
Properties and use the Reset Account button on the Details Tab. Finally, you can
launch the user list and double-click on the user for the Properties dialog to appear, and
again use the Reset Account button.