Interlogix TruVision Navigator 5.0 User Manual - Manual (Page 152)

Appendix A: Device Settings
144 TruVision Navigator 5.0 Service Pack 3 User Manual
Feature Support Notes
Audio Yes There are 4 audio input per device. That input can
be mapped to any camera on the device simply by
enabling audio on that camera. Access the setting
by going to the device configuration, and enabling
the audio option on the Recording Tab for each
camera. If enabled, as soon as any camera from
the device is added in the TruVision Navigator
Viewer and selected, the audio will play.
Bi-directional
Audio No
Notifications No
Health
Diagnostics IP Address
MAC Address
Model Name
Serial Number
Firmware Version
Device Date/Time
Total Device Health
HDD Status
HDD Capacity
Cameras in Video Loss
Cameras in Alarm
Current Client Connections
Record Status
Firmware Upload Yes
Bulk Firmware
Upload No
Device
Configuration No
Bulk
Configuration No
Device Log
Support No
Remote Reboot Yes