Interlogix TruVision Navigator 5.0 User Manual - Manual (Page 13)

Chapter 1: Overview
TruVision Navigator 5.0 Service Pack 3 User Manual 5
also includes the licensing screen for TruVision SVR recorder. Please see TruVision
SVR User Manual for more information on licensing.
The Notifier dialog allows you to collect and manage any notifications sent to you from
the devices. You can select an alert in the Notifier panel and view the video results in the
Viewer panel. You must configure your devices to send these notifications over the
network via TCP or SMTP to the IP address of the TruVision Navigator Server machine.
In addition, the firewall must be configured on the TruVision Navigator Server machine to
accept these network notifications.
These notifications may include Alarm, Video Loss, Motion, Fan Failed, Disk Failed,
User Locked at Device, Video Erased, Disk Full, Device Powered Up, and more
depending on the device model.
The Services dialog shows general information on all of the TruVision Navigator
services including Network Time Protocol, Diagnostic Polling, and Notification Service.
This includes the service name, location, status, and the ability to start, stop, or disable
the service. Standalone installations will only show the Network Time Protocol service in
this dialog since the other services are embedded in Settings menu.