Interlogix TruVision Navigator 5.0 User Manual - Manual (Page 48)

Chapter 3: Operation
40 TruVision Navigator 5.0 Service Pack 3 User Manual
clicking on the device and selecting Connect. Upon successful connection, the Navigator
will populate the respective cameras under the device.
Figure 37: Connect to off-line device
If you have channels on a DVR that will not be used, you can mark them as "unused" so
they do not appear in the Navigator under the DVR. To do this, go to the Camera Title
section under the DVR Configuration menus, mark the "Camera Not in Use" check box,
and click Save. This will hide the cameras in the Navigator. To show them again, simply
un-check the same box in the configuration and click Save.
Device Management Tool
Device Management tool provides various information and functions to ensure the ease
of system setup and maintenance. To access to the device management interface;
• Right Click [Devices] and select [Device Management]