Interlogix TruVision Navigator 5.0 User Manual - Manual (Page 130)

Appendix A: Device Settings
122 TruVision Navigator 5.0 Service Pack 3 User Manual
Feature Support Notes
Focus, Iris
Control Yes
Presets Yes
Tours Go To
Record
Only 1 tour is supported (which is hard coded to
Tour 1 on the PTZ camera).
Camera Search Alarm
Event
Motion
Text
POS Text Yes
Motion Yes Get the configuration for this device via TruVision
Navigator and set the active zones on a per camera
basis via the Motion Configuration option
associated with each camera.
Audio Yes There are 4 audio input per device. That input can
be mapped to any camera on the device simply by
enabling audio on that camera. Access the setting
by going to the device configuration, and enabling
the audio option on the Recording Tab for each
camera. If enabled, as soon as any camera from
the device is added in the TruVision Navigator
Viewer and selected, the audio will play.
Bi-directional
Audio Yes