Interlogix TruVision Navigator 5.0 User Manual - Manual (Page 168)

Appendix A: Device Settings
160 TruVision Navigator 5.0 Service Pack 3 User Manual
Feature Support Notes
How to assign the
TVN40 an IP
Address The TruVision NVR 40 is designed for
configuration and installation through an
Ethernet network.
Follow these steps to change the
TVN40's default IP Address for use on
your network.
Launch your web browser and connect
to the TVN40 via its default IP Address
of 192.168.1.2.
Access the device configuration window,
by selecting Administration from the
main menu. Enter username: admin and
Password: admin on the login screen.
Select the Network Configuration icon.
Enter the appropriate network
configurations.
Click the Apply button at the bottom of
the window, to confirm the configuration.
Restart the NVR 40 unit by clicking
Restart on the Web server main menu.
Allow 3-5 minutes for the restart to
complete.
Verify that you can connect to the Web
server using the new settings.
Your TVN40 is now ready to be added
to TruVision Navigator.