Interlogix TruVision Navigator 5.0 User Manual - Manual (Page 122)

Appendix A: Device Settings
114 TruVision Navigator 5.0 Service Pack 3 User Manual
Feature Support Notes
Instant Replay Yes There is a 2 to 5 minute video buffer in the
device. While video is in the buffer, it cannot be
viewed. Once the buffer fills, the video is written
to the hard drive and is available for playback.
This affects Instant Replay and the Playback
button in TruVision Navigator. Those 2 features
get their time increment from the user-defined
Instant Replay configuration on the TruVision
Navigator Server Properties Tab. As a result,
set this time increment to greater than 5 minutes
to be safe. If you try to search for video that is
still in the buffer, you will be taken to Live video.
Disk Analysis Alarm
Motion
Recorded
Unknown
Video Loss is not supported in disk analysis.
Disk analysis takes approximately 45 to 90
seconds depending on the amount of recorded
data on the device.
Video Export Yes There will be approximately 4 seconds of
additional video exported prior to the specified
start time.
TruVision Navigator
Player Yes .mp4 proprietary file format.
PTZ Control Yes
Focus, Iris Control Yes PTZ protocol ge RS-485 does not support Focus
and Iris commands in this release.
Presets Yes
Tours Go To
Record
Only 1 tour is supported (which is hard coded to
Tour 1 on the PTZ camera).
Camera Search Alarm
Event
Motion
Text Search is not supported on the device.
Motion Yes get the configuration for this device via TruVision
Navigator and set the active zones on a per
camera basis via the Motion Configuration option
associated with each camera.
Audio Yes There are 16 audio inputs per device (1 per
channel). Enabling audio on the device is a per
channel setting. Access the settings by going to
the device configuration, and enabling the audio
option on the Recording Tab for each camera. If
enabled, as soon as any camera from the device
is added in the TruVision Navigator Viewer and
selected, the audio will play.