Interlogix TruVision Navigator 5.0 User Manual - Manual (Page 52)

Chapter 3: Operation
44 TruVision Navigator 5.0 Service Pack 3 User Manual
Adding a TruVision 360 Camera
TruVision Navigator 5.0 SP3 supports the Interlogix 360 degree panoramic cameras.
These cameras can be added to TruVision NVRs as a regular IP camera, manually, or,
via discovery tool.
Each Panoramic camera provides five streams to the user.
- 1x Raw 360 degree image
- 1x Two 180 degree bands in one video stream
- 3x 120 degree streams with digital PTZ capability
When a panoramic camera is added to a device, the camera will show up in the device
tree, and have its own node with up to five channels listed under it. By default, the
panoramic camera will be added with only 360 degree mode enabled. To add the rest of
the views:
- Right click on the camera and select properties.
- In the properties menu, select the views desired, and click Ok.
Import an address book
Prior to importing an existing WaveReader or SymNav address book, you must first
export the address book from either of those applications.
For WaveReader, use export Option 1 to export to a comma-delimited file.
For SymNav, use the Comma Delimited File option.
Both these options will export to a text (.txt) file.
Save that file to a location where you will perform your import to TruVision Navigator.
Once that is complete, login to TruVision Navigator and perform the following steps:
Right-click on the Devices node in the Navigator and select Import Address Book.