Interlogix TruVision Navigator 5.0 User Manual - Manual (Page 69)

Chapter 3: Operation
TruVision Navigator 5.0 Service Pack 3 User Manual 61
• Source - this is where you select the device type of the devices you want to
configure. As you select different device types, the destination list will toggle
in real-time to show the applicable like-devices in the system.
• Settings - initially, a configuration template will appear for that device type
selected in the source. This generic template will show all of the necessary
configurations for that device type but won't have any values populated in the
fields. This allows users to simply pick and choose the exact configuration
fields they want to update and push only those to the destination devices.
To start with a blank configuration template, select a device type from the
dropdown list on the left of the screen.
To use a specific device as a reference configuration, select that device from the
Source tree. You can use the Clear button at any time to remove all
configuration values and go back to a blank configuration template.
• Destination - if there is a source device that mirrors the exact configuration
you want to copy, you can select that device in the source and it will load in
settings. You can push this entire configuration to destination devices or
change some configurations and then push it all to destination devices.
Upon initiation (now or on a schedule), a task will be created in the Tasks panel for each
device that will have configurations made. Monitor progress of the configurations there.