Interlogix TruVision Navigator 5.0 User Manual - Manual (Page 68)

Chapter 3: Operation
60 TruVision Navigator 5.0 Service Pack 3 User Manual
that audio. At the TruVision Navigator Client PC, speakers need to be attached and the
volume control needs to be turned up. Specific video tiles need to be selected to hear
the audio. If multiple video tiles are selected, no audio will play. See the device-specific
chapters for more detail on this functionality.
Motion detection notifications are available in TruVision Navigator assuming several
setup steps are completed. At a high-level, the device needs to be configured to trigger
notifications on motion and each camera's field of view needs to be configured for the
active zones. TruVision Navigator must also be configured to accept those motion
notifications on a specific port. See the device-specific chapters and Notification Section
for more detail on this functionality.
The bulk device configuration feature offers you an easy way to remotely update and
maintain the configurations of devices in the system. This powerful capability allows you
to push a single configuration parameter across all like-devices or as many configuration
parameters as necessary across all like-devices. As with a single device configuration,
this action can be performed immediately or on a schedule.
To configure like-devices in bulk, right-click on the Devices node in the Navigator and
select Bulk Configuration. The Bulk Configuration dialog will appear.
Figure 53: Bulk Configuration
There are 3 sections in the Bulk Configuration dialog: Source, Settings, and Destination.