Toa M-9000M2 v.2.00 - Manual (Page 122)

122
Use the supplied rack mounting bracket when mounting the unit in an equipment rack.
Step 1. Remove four M4 x 8 screws on the sides.
The removed screws are no longer used.
Step 2. Attach the rack mounting bracket to the unit using the supplied four M4 x 16 bracket mounting screws.
ON/OFF
OUTPUT SEL
ON/OFF OU TPU T V OLU ME
INP UT V OLU ME
POWER
UTILITY
ESC/BACK
MEMORY
ENTER PA RA ME TER
8
7 6
5 4 3
2 1
INP UT S ELE CT
Rack mounting bracket
(supplied)
Screws removed in Step 1 are no longer used.
Bracket maunting screw M4 x 16 (supplied)
Notes
• Remove 4 plastic feet on the bottom surface when mounting the unit in a rack.
• Rack mounting screws are not supplied with the unit. Use the screws that are appropriate for the rack.
• Install the unit at a well-ventilated place, and be sure to mount a 1U or more size perforated panel above
and below the unit to prevent the unit's internal temperature rise.
15. RACK MOUNTING BRACKET ATTACHMENT