Toa M-9000M2 v.2.00 - Manual (Page 39)

39
[SIMULTANEOUS MODE]
Arbitrary cross points assigned to the buttons on the remote controller can be turned ON or OFF.
Arbitrary cross points can be assigned to a single button.
This is a convenient function to individually turn ON or OFF the sound source output channel by the remote
controller installed at the output destination, which is ideal for selecting and outputting the multiple sound
sources by pressing a button on the remote controller at the output destination.
(Example) Expanding the output destination
Perform remote controller settings using the PC Setting software.
Assign cross point control to 2 buttons on the remote controller: one for cross point control to route Input 1, 2,
and 3 to Output 1, and the other for cross point control to route Input 1, 2, and 3 to Output 2. (Refer to the PC
Setting software screen below.)
In such setting above, mixed audio signals of inputs 1, 2, and 3 can be broadcast to Zone 1 (Output 1) and
Zone 2 (Output 2) as well through the remote controller operation.