Toa M-9000M2 v.2.00 - Manual (Page 147)

147
26.2.3. T-001T
+24 V DC, –24 V DC, +6 V DC
35 mA (at +24 V DC), 35 mA (at –24 V DC), 60 mA (at +6 V DC)
2 channels, max. +20 dB* (at 10 kΩ load), 600 Ω, electronically-balanced,
removable terminal block (3 pins)
20 Hz – 20 kHz +1, –3 dB
0.005% (at 1 kHz, 20 Hz – 20 kHz BPF, 5 V output, 10 kΩ load)
Over 73 dB (at 20 Hz – 20 kHz BPF)
Under –91 dB (at 20 Hz – 20 kHz BPF, VOL: –70 dB)
Over 87 dB (at 20 kHz)
24 bit Δ∑DAC
48 kHz
Bass:
±12 dB (at 100 Hz)
Treble: ±12 dB (at 10 kHz)
10 bands, Frequency: 20 Hz – 20 kHz, 31 points, Variable range: ±12 dB,
Q: 0.3 – 5
10 (PC software has 30 TOA speaker presets.)
–12 dB/oct, Variable frequency range: 20 Hz – 20 kHz, 31 points
–12 dB/oct, Variable frequency range: 20 Hz – 20 kHz, 31 points
Depth: 1 – 5
0 – 40 ms (1 ms step), maximum 40 ms (CH1 + CH2), mixer mode only
–10 to +40°C (14 – 104°F)
Panel: Aluminum, hair-line
35 (w) x 78 (h) x 91.5 (d) mm (1.38" x 3.07" x 3.6")
82 g (0.18 lb)
Power Source
Current Consumption
Output
Frequency Response
Total Harmonic Distortion + N
S/N Ratio
Residual Noise
Cross Talk
D/A Converter
Sampling Frequency
Tone Control
Parametric Equalizer
Speaker Equalizer
High-pass Filter
Low-pass Filter
Compressor
Delay
Operating Temperature
Finish
Dimensions
Weight
* 0 dB = 1 V
Note: The design and specifications are subject to change without notice for improvement.
• Accessories
Removable terminal plug (3 pins) .................... 2
Machine screw M3 x 8 ..................................... 2