Toa M-9000M2 v.2.00 - Manual (Page 35)

35
[Telephone paging in MANUAL mode]
This is a method to directly select each output channel with the telephone key operation.
In this mode, if the paging zone number and the output channel number are identical, paging zones can freely
be combined with the key operation without the need to perform paging zone settings.
ZONE 1
(Output channel 1) ZONE 2
(Output channel 2) ZONE 3
(Output channel 3) ZONE 4
(Output channel 4) ZONE 5
(Output channel 5)
PBX
Telephone paging
“0123#”
Make a paging call to
zones 1, 2, and 3.
M-9000M2
Power amplifier
In this example, first make the paging initiation call (to be preset at the telephone) to the ZP-001T, then press
"0, 1, #" to make paging calls to Output channel 1, press "0, 2, #" to Output channel 2, or press "0, 9, #" to all
output channels.
To make paging by selecting two or more output channels, activate the paging, then press "0, 1, 2, 3, #" to
make paging calls to Output channels 1, 2, and 3, similarly press "0, 1, 4, 5, #" to Output channels 1, 4, and 5.