Toa M-9000M2 v.2.00 - Manual (Page 151)

151
26.3.4. ZM-9003
Note: The design and specifications are subject to change without notice for improvement.
• Accessories
Machine screw (for box mounting) No.6-32UNC x 30 .......... 4
Machine screw (for box mounting) M4 x 30 .......................... 4
Machine screw (for panel mounting) No.6-32UNC x 6 ............ 4
Removable terminal plug (7 pins) ............................................. 1
26.3.3. ZM-9002
Note: The design and specifications are subject to change without notice for improvement.
• Accessories
Machine screw (for box mounting) No.6-32UNC x 30 .......... 2
Machine screw (for box mounting) M4 x 30 .......................... 2
Machine screw (for panel mounting) No.6-32UNC x 6 ............ 2
Single conductor shielded cable
50 Ω or less (per line)
M3 screw terminal, distance between barriers: 7.62 mm
4 control buttons, 1 volume control
–10 to +40°C (14 – 104°F)
Surface-treated steel plate, white, paint
72 (w) x 127 (h) x 56 (d) mm (2.83" x 5" x 2.2")
170 g (0.37 lb) Applicable Cable
Line Resistance
Terminal
Operating Section
Operating Temperature
Finish
Dimensions
Weight
250 Ω or less (per line)
Removable terminal block (7 pins)
4 control selector buttons (interlocking type)
2 control buttons (momentary type)
–10 to +40°C (14 – 104°F)
Surface-treated steel plate, white, paint
120 (w) x 127 (h) x 53.3 (d) mm (4.72" x 5" x 2.1")
375 g (0.83 lb) Line Resistance
Terminal
Operating Section
Operating Temperature
Finish
Dimensions
Weight