Toa M-9000M2 v.2.00 - Manual (Page 57)

57
0 1 - S C E N E 1
1
INPUT SELECT
I N 1 - I N 1 : O F F
I N 1 - - - - - - - -
I N 1 - I N 1 : O N 0. 0
I-ON/OFF
IN : -∞, -70 to +10 (0.5 dB steps)
To/from lowermost screen
(p.59-A1)
(p.59-A2)
1
INPUT SELECT
P
P R E P A G I N G - O F F
(p.65-A26)
or : ON/OFF P I-ON/OFF
P A G I N G T I M E 3 0
(p.65-A29)
: 30 (sec), 10 (m) P
: 01 to 32 P
M O D E => P A G I N G P O R T
(p.65-A27)
: RINGING SIGNAL, PAGING PORT P
P R I O R I T Y 2
(p.65-A28)
: 1, 2, 3 P
D U C K E R - D E P T H O F F
(p.62-A15)
: OFF, -50, -40, -30, -20, -10, 0 (dB) P
: 1 to 8 P : 01 to 32 P
P A G I N G : M A N U A L
(p.66-A30)
P A G I N G : AUTO G R P 0 1 I N 1 -> O U T 1
(p.66-A31)
(p.66-A32)
P A G I N G : I N 1 -> O U T 1
P
P
P A G I N G : Z O N E G R O U P 1 G R P 0 1 I N 1 -> O U T 1
(p.66-A33)
1 G R P 0 1 I N 1 -> O U T 1
(p.66-A34)
1 G R P 0 1 I N 1 -> O U T 1
(p.66-A35)
P A G I N G S Y N C O F F
P
P A G I N G S Y N C O N
(p.63-A20)
(p.63-A21)
S Y N C O U T C - O U T 0 1
: 01 to 32 P
G R P 0 1 I N 1 -> MANU
(p.66-A31)
To/from uppermost screen
: (ON), - (OFF) O-ON/OFF
The screen display examples may differ from actual displays.
The on-screen indications shown in blue are variable parameters
by key operation.
The symbols in the figure represent the following key operation.
: Screen shift keys (up and down)
: Screen shift key (right) or ENTER key
: Screen shift key (left) or ESC key
: PARAMETER knob
: INPUT VOLUME knob
: Input channel ON/OFF key
: Output channel ON/OFF key
I-ON/OFF
O-ON/OFF
P
IN
: Cycles meter display (FADER /LEVEL) below
the setting screen each time pressed.
: Selects characters to enter.
(Right shift key): Moves the cursor to the right.
: Selects OUT. P
: Confirms the setting. O-ON/OFF
: Selects OUT. P
: Confirms the setting. O-ON/OFF
Normal use state
: 1 to 12 P or
10.2.2. Input setting flow chart for the channel on which the ZP-001T is used