Toa M-9000M2 v.2.00 - Manual (Page 58)

58
0 1 - S C E N E 1
Normal use state 1
INPUT SELECT
A N C 1 - I N 3
A N C 1 - - - - - - - -
To/from lowermost screen
The screen display examples may differ from actual displays.
The on-screen indications shown in blue are variable parameters
by key operation.
The symbols in the figure represent the following key operation.
: Screen shift keys (up and down)
: Screen shift key (right) or ENTER key
: Screen shift key (left) or ESC key
: PARAMETER knob
: Input channel ON/OFF key I-ON/OFF
P
A N C 1 - B Y P A S S A N C 1 - ACTIVE
P
(p.67-A37)
M O N I T O R O U T - O F F M O N I T O R O U T - O N
I-ON/OFF
P or
(p.68-A41)
(p.67-A36)
1
INPUT SELECT
: Cycles meter display (FADER /LEVEL) below the setting screen each time pressed.
: Selects characters to enter.
(Right shift key): Moves the cursor to the right.
P
A N C - S E N S I T I V I T Y - 1 0
(p.67-A38)
: -60, -54, -48, -42, -36, -30, -24, -18, -10 (dB) P
A N C - P H A N T O M O F F
(p.67-A39)
or : ON/OFF P I-ON/OFF
S A M P L E T I M E 2 0
(p.68-A45)
: 10, 15, 20, 30, 60, 120, 180, 300 (sec) P
M A X I M U M L E V E L 0
(p.68-A43)
: -15, -12, -9,
-6, -3, 0 (dB)
P
M I N I M U M L E V E L - 6
(p.68-A44)
: -18, -15, -12, -9, -6, -3 (dB) P
A N C - A P P L I E S -> O U T 1
(p.67-A40)
: Selects OUT. P
M O N I T O R O U T - O U T 4
(p.68-A42)
: Selects OUT. P
G A I N , R A T I O 3 : 3
(p.69-A46)
: 6:3, 5:3, 4:3, 3:3, 3:4, 3:5, 3:6, 6:-3,
5:-3, 4:-3, 3:-3, 3:-4, 3:-5, 3:-6 P
A N C A D J 0 S E N S - 5 0
(p.69-A47)
: -10 to +10 (1 dB steps) P
To/from uppermost screen
10.2.3. Input setting flow chart for the channel on which the AN-001T is used