Toa M-9000M2 v.2.00 - Manual (Page 85)

85
(C35) Password setting
S E T P A S S W O R D -> - - - -
(C34) Password setting (C37) Password deletion
S E T P A S S W O R D C L E A R P A S S W O R D
Sets or deletes the password.
To set the password, press the Enter key at the password setting screen to proceed the setting.
To delete the set password, press the Enter key at the password deletion screen, and the confirmation screen
is displayed.
Passwords can be set only when the keys are not locked.
Use the Input channel selection key to set the password and use the Left and Right shift keys to move
between characters. For password setting procedure, refer to
p. 92 "Password setting."
(C36) Password setting confirmation
P A S S W O R D OK?
Confirmation screen to set the password.
Pressing the Enter key sets the password.
(C38) Password deletion confirmation
C L E A R O K ?
Confirmation screen to delete the set password.
Pressing the Enter key deletes the password.
(C39) Communication speed (bps) setting
R S - 2 3 2 C = 5 7. 6
9.6 k, 19.2 k, 38.4 k, 57.6 k (default), 115.2 k Setting Range
(C32) Setting key lock ON/OFF
K E Y L O C K U T I L O F F
(C33) Power switch lock ON/OFF
K E Y L O C K P O W E R O F F
Selecting ON locks Utility key, Memory key, Enter key, Escape/Back key, and Parameter setting knob.
Selection ON locks the Power switch.
Setting this function disables the power switch to be turned off when the unit's power is on. (Power can be
turned on whenever the unit is off irrespective of the power switch lock ON/OFF status.)
To power off the unit, perform the remote control or turn the power switch off in the normal operation mode
after setting the power switch lock function to OFF here and exiting the function setting mode.