YSI 5200A - Manual (Page 109)

YSI 5200A
217
YSI 5200A
216
Menu Maps

continued next page
Run Screen → Menus → Sensor Setup →
Conductivity
Conductivity (Enabled)
Conductivity (Enabled)
Control Mode (Set Point)
T
Set Point
PID/PWM
Alarms (Disabled)
Alarm Low (460uS) 1 to 10000*

Alarm Low Output (disabled)
Alarm Low (Disabled)
Instrument (Local Machine)
Relay (Relay 1)
T
Relay 1
Relay 2
Relay 3
Relay 4
Set Point control only Range Low (480 uS)
461 to 10000*

Range Low (Disabled)
Instrument (Local Machine)
Relay (Relay 1)
T
Relay 1
Relay 2
Relay 3 Relay 3
Relay 4
Dose Up (30 Sec)
1‐255

Time Units
T
Sec
Min
Hours
Dose Up Wait (15 Min)
1‐255

Time Units
T
Sec
Min
Hours
Set Point (500 uS)
481 to 10000*

PID/PWM control only Control Up/Down (Rising)
T
Rising
Falling
Menu Maps
Run Screen → Menus → Sensor Setup →
Conductivity continued from previous page
PID/PWM control only P.I.D. Interval (100.00)
1.00 to 999.90

PID/PWM control only P.I.D. Reset Interval (20.00)
1.00 to 999.90

PID/PWM control only P.I.D. Gain (2000)
0.00 to 10.00
1.00 to 999.90

PID/PWM control only P.I.D. Relay (Disabled)
Range Low (Disabled)
Instrument (Local Machine)
Relay (Relay 1)
T
Relay1
Relay2
Relay 3
Relay 4
Set Point control only Range High (520uS)
501 to 10000*

Range High Output (disabled)
Instrument (Local Machine)
Relay (Relay 1)
T
Relay 1
Relay 2
Relay 3
Relay 4
Alarm High (540uS)
521 to 10000*
 
Alarm High Output (disabled)
Alarm High Output enable/disable
Instrument (Local Machine)
Relay (Relay 1)
T
Relay 1
Relay 2
Relay 3
Relay 4
Set Point control only Dose Down (30 Sec)
1‐255

Time Units
T
Sec
Min
Hours
Dose Down Wait (15 Min)
1‐255
Time Units 
T
Sec
Min
Hours
Temp Comp % (1.91%)
0.00 to 4.0