YSI 5200A - Manual (Page 111)

YSI 5200A
221
YSI 5200A
220
Menu Maps

continued next page
Run Screen → Menus → Sensor Setup →
ORP
ORP (Enabled)
ORP (Enabled)
Control Mode (Set Point)
�
Set Point
PID/PWM
Alarms (Disabled)
Alarm Low (340 mv)
‐2000 to 2000*

Alarm Low (Disabled)
Alarm Output enable/disable
Instrument (Local Machine)
Relay (Relay 1)
�
Relay 1
Relay 2
Relay 3
Relay 4
Set Point control only Range Low (350mv)
341 to 2000*

Range Low Output (disabled)
Instrument (Local Machine)
Relay (Relay 1)
�
Relay 1
Relay 2
Relay 3
Relay 4
Set Point (400 mv)
351 to 2000*
PID/PWM control only Control Up/Down (Rising)
�
Rising
F lli Falling
PID/PWM control only P.I.D. Interval (100.00)
1.00 to 999.90

PID/PWM control only P.I.D. Reset Interval (20.00)
1.00 to 999.90

PID/PWM control only P.I.D. Gain (2000)
0.00 to 10.00
1.00 to 999.90

Menu Maps
Run Screen → Menus → Sensor Setup →
ORP continued from previous page
Set Point control only Range High (425 mv)
401 to 2000*

Range High (Disabled)
Instrument (Local Machine)
Relay (Relay 1)
�
Relay 1
Relay 2
Relay 3
Relay 4
Alarm High 2 (435 mv)
426 to 2000*

Alarm High Output (disabled)
Alarm High Output enable/disable
Instrument (Local Machine)
Relay (Relay 1)
�
Relay 1
Relay 2
Relay 3
Relay 4