YSI 5200A - Manual (Page 13)

YSI 5200A
24
3 Installation & Wiring
-Installing & wiring 5200A, components, and peripheral
devices.
CAUTION: Surge protectors are strongly recommended to protect from second-
ary surges and lightning. Surge suppression devices should be located on the AC
line supplying power to the 5200A and any signal lines connecting the 5200A.
See Lightning and Surge Protection - page 62.
CAUTION: It is essential that all low voltage wiring, including sensor wiring be
run in a separate cable or conduit from high voltage wiring.
Health and Safety (Calibration Solutions)
Calibration Solutions
CAUTION: Reagents used to calibrate and check this instrument may be haz-
ardous to your health. Some calibration solutions may require special handling.
Refer to the Material Safety Data Sheet (MSDS) of the reagent being used for
product specific safety information. MSDSs can be obtained from the company
who supplied or manufactured the reagent.
Safety