Luxul XMS-1024P - Manual (Page 10)

10
XMS-1024P
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XMS-1024P Vers: 081314
Chapter Introduction
Chapter 16 Maintenance This chapter will show how to use the common system
tools to manage the Switch.
„
System Monitor: The memory and CPU usage of
the Switch.
„
Log: View system events.
„
Device Diagnostics: Test the connection status of the
cable connected to the Switch.
„
Network Diagnostics: Ping and Traceroute utilities to
test connection at the Switch.
Appendix A Specifications Lists the hardware specifications of the Switch.
Appendix B Configure the PCs Introduces how to configure the PCs.
Appendix C Load Software
Using FTP
Introduces how to load software of the Switch using
FTP function.
Appendix D 802.1X/RADIUS
Client Software Introduces how to use 802.1X/RADIUS Client Software
provided for Authentication.
Appendix E Glossary The glossary of the manual.z
2 INTRODUCTION
Thanks for choosing the Luxul XMS-1024P Managed PoE/PoE+ Switch
2.1 Overview of the Switch
Designed to meet Commercial Grade requirements, the XMS-1024P from LUXUL
provides wire-speed performance and IP Layer 2 Management features to give you the
best service and security available.
The EIA Standardized framework and smart configuration capacity provides a flexible
solution for any scale of Network. ACL, 802.1X/RADIUS and Dynamic ARP Inspection
provide robust security. QoS and IGMP Snooping/Filtering help optimize Voice and
video applications. Link Aggregation (LACP) increases aggregated bandwidth, optimizing
the transport of critical Data. SNMP, RMON, Web Management/CLI/Telnet Log-in op-
tions give you maximum Management flexibility. The XMS-1024P Managed PoE Switch
is also a Power Source Equipment device. All the Auto-Negotiating RJ45 Ports on the
Switch support Power over Ethernet, which can automatically detect and supply power
to Powered Devices complying with the IEEE 802.3af and IEEE 802.3at standards.