Luxul XMS-1024P - Manual (Page 104)

104
XMS-1024P
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XMS-1024P Vers: 081314
Choose the menu Spanning Tree>>MSTP Instance>>Instance Confi g to load the
following page.
Figure 7-8 Instance Confi g
The following entries are displayed on this screen:
Instance Table
Instance ID Select: Select button to quick-select the corresponding Instance ID.
Select:
Select the desired Instance ID(s) for confi guration.
Instance: Displays Instance ID of the Switch.
Status: Enable/Disable the instance.
Priority: Enter the Priority of the Switch in the Instance. Priority is an important
criterion in determining if the Switch will be chosen as the Root Bridge in
the specifi c Instance.
VLAN ID: Enter the VLAN ID(s) which belong to the corresponding Instance ID.
Clear: Click the Clear link to remove all VLAN IDs from the Instance ID. All
removed VLAN ID(s) will be automatically mapped to the CIST.
VLAN-Instance Mapping
VLAN ID:
Enter the desired VLAN ID(s). The new VLAN ID will be added to the
corresponding Instance ID and any previously entered VLAN ID will
not be replaced.
Instance ID: Enter the corresponding Instance ID.