Xms-1024p, The following entries are displayed on this screen – Luxul XMS-1024P User Manual
Page 174
174
XMS-1024P
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XMS-1024P Vers: 081314
The following entries are displayed on this screen:
Create Standard-IP ACL
ACL ID:
Select the desired Standard-IP ACL for configuration.
Rule ID:
Enter the Rule ID.
Operation:
Select the operation the Switch will use to process packets.
Permit: Forward Packets.
Deny: Discard Packets.
S-IP:
Enter the Source IP Address to be contained in the Rule.
D-IP:
Enter the Destination IP Address to be contained in the Rule.
Mask:
Enter IP Address Mask. If it is set to 1, the Switch must Match the
Address Exactly.
Time-Range:
Select the Time-Range for the Rule to take effect.
CAUTION: Standard-IP ACL Rule settings will be restored to defaults if
the Switch is restarted and you have not selected Save Config
from the main menu and saved your running configuration to
non-volatile memory.
11.2.5 Extended-IP ACL Rules
Extend-IP ACL Rules analyze and process Data packets based on a series of matching
conditions. They can analyze the Source IP Address, Destination IP Address, IP Protocol,
TCP Flag, Source-Port, Destination-Port, DSCP field values, IP ToS field values and IP
Precedence field values.