Xms-1024p, The following entries are displayed on this screen – Luxul XMS-1024P User Manual
Page 70
70
XMS-1024P
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XMS-1024P Vers: 081314
The following entries are displayed on this screen:
VLAN Config
VLAN ID:
Enter the ID number of VLAN.
Description:
A description of the VLAN for identification.
Check:
Click the Check button to verify if the VLAN ID entered is valid
and available.
T VLAN Members
Port Select:
Click the Select button to quick-select the corresponding entry based on
the Port number you entered.
Select:
Select the desired Port(s) to be added as a member of the VLAN or leave it
blank to not add it to the VLAN.
Port:
Displays the Port number.
Link Type:
Displays the Link Type of the Port. It can be change in Port VLAN
Config screen.
Egress Rule:
Select the Egress Rule for the VLAN Port member. The default Egress Rule
for all ports until the Link Type is changed is UNTAG.
TAG: All packets forwarded by the Port are tagged.
UNTAG: All packets forwarded by the Port are untagged.
LAG:
Displays the LAG to which the Port belongs.
CAUTION: VLAN Config settings will be restored to defaults if the
Switch is restarted and you have not selected Save Config
from the main menu and saved your running configuration to
non-volatile memory.
6.1.2 Port Config
When creating an 802.1Q VLAN please survey all the devices connected to the Switch in
order to configure the Port Link Type properly for the connected device.