Luxul XMS-1024P - Manual (Page 126)

126
XMS-1024P
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XMS-1024P Vers: 081314
Before confi guring a Multicast VLAN, you should fi rst confi gure a VLAN and add the
corresponding Ports to the VLAN on the
802.1Q VLAN page. If the Multicast VLAN is
enabled, the Multicast confi guration for other VLANs on the VLAN Confi g page will be
deleted and the Multicast streams will be transmitted only within the Multicast VLAN.
Choose the menu Multicast>>IGMP Snooping>>Multicast VLAN Confi g to load the
following page.
Figure 8-7 Multicast VLAN Confi g
The following entries are displayed on this screen:
Multicast VLAN
Multicast VLAN: Enable/Disable Multicast VLAN feature.
VLAN ID: Enter the VLAN ID of the Multicast VLAN. The VLAN ID must be
confi gured in the 802.1Q VLAN page.
Router Port Time: Specify the Aging Time of the Router Port (Multicast Server). If the
Switch does not receive any IGMP Query Messages from the Router
Port before the time elapses, it will no longer consider this Port a Router
Port. Default value is 300 seconds.
Member Port Time: Specify the Aging Time of the member Port. If the Switch does not
receive any IGMP Report Messages from the Member Port, it will no
longer consider this Port a Member Port. Default value is 260 seconds.
Leave Time: Specify the interval between the Switch receiving a Leave Message from
a host and the Switch removing the host from the Multicast Group.
Default value is 1 second.
Router Port: Select the Static Router Port, used in a Network with stable topology