Luxul XMS-1024P - Manual (Page 13)

13
User Guide
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
LED Status Indication
Power On The Switch is powered on
Off The Switch is powered off or power supply has failed
Flashing Indicates a Power fault
System Flashing The Switch booted without error and is running
On The Switch encountered a boot error
10/100/1000
Mbps Port LED Green On A 1000 Mbps device is connected to the
corresponding Port
Flashing Data is being transmitted or received on the
corresponding Port
Yellow On A 10/100 Mbps device is connected to the
corresponding Port
Flashing Data is being transmitted or received on the
corresponding Port
Off No device is connected to the corresponding Port
When the PoE display is active, the Port LED indicates the PoE status of the Port.
LED Status Indication
Power On The Switch is powered on
Off The Switch is powered off or power supply has failed
Flashing Indicates a Power fault
System Flashing The Switch booted without error and is running
On The Switch encountered a boot error
PoE Max On The remaining PoE power available is ≤ 7W
Flashing The remaining PoE power available stays at ≤ 7W the
LED will remain on for 2 minutes
Off The remaining PoE power available is > 7W
10/100/1000
Mbps Port LED Green On The Port is supplying power normally
Flashing The supply power exceeds the correspond PD’s
(Powered Device) maximum power
Yellow On Overload or short circuit is detected
Flashing PD Power-On self-test has failed
Off No PoE power is being provided on the Port