Luxul XMS-1024P - Manual (Page 269)

269
User Guide
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
15.3 Cluster
A Commander Switch can recognize and add a Candidate Switch to a Cluster
Automatically based on NDP and NTDP. You can Manually add a Candidate Switch to
a Cluster. If the Candidate Switch is successfully added to the Cluster it will receive a
private IP Address assigned by the Commander Switch. You can manage and confi gure
the member Switch via the Commander Switch.
Note: The XMS-1024P cannot be confi gured as a Commander Switch and
cannot manage the Cluster.
The Cluster function is implemented on the Cluster Summary and
Cluster Confi g pages.
15.3.1 Cluster Summary
On this page you can view the Status of the current Cluster.
Choose the menu Cluster>>Cluster>>Cluster Summary to load the following page:
Figure 15-9 Cluster Summary for Candidate Switch
The following entries are displayed on this screen:
Cluster Confi g Status
Cluster: Displays the Cluster Status (Enabled/Disabled) of the Switch.
Cluster Role: Displays the role the Switch plays in the Cluster.