Luxul XMS-1024P - Manual (Page 121)

121
User Guide
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
Leave Time: Indicates the interval between the Switch receiving a leave message from a
client device and the Switch removing the client device from the Multicast Group. The
default value is 1 second.
The IGMP Snooping function is implemented on Snooping Confi g, Port Confi g, VLAN
Confi g and Multicast VLAN pages.
8.1.1 Snooping Confi g
To confi gure IGMP Snooping on the Switch, please fi rst confi gure the IGMP Global
confi guration and related parameters on the following page.
If the Multicast Address of the received Multicast Data is not in the Multicast MAC
Table, the Switch will broadcast the Data in the member VLAN. When Unknown
Multicast Discard feature is enabled, the Switch drops the received Unknown Multicast
packets to save bandwidth and enhance the effi ciency of the Network.
Choose the menu Multicast>>IGMP Snooping>>Snooping Confi g to load the
following page.
Figure 8-4 Basic Confi g